|
» Generated Results for stainless steel tubing
Tubing Cutter cuts stainless steel.
Ridge Tool Co. -- May 16, 2002
... with E1525 cutter wheel provides clean, accurate cutting of stainless steel tubing. Large knob gives user more control over feedscrew - uses 6 individual bearings that help decrease drag around tubing. Bearings create smooth, fluid cut, reducing number of rotations needed to cut tubing. It cuts tubing from 3/16 to 1 1/8 ...
Tube End Facing Tools suit pressure vessel fabrication.
Wilson, Thomas C., Inc. -- May 07, 2002
... Fixed-Type for 1/4 to 9/16 in. OD tubes, and Insert-Type for 5/8 to 2 in. OD tubes. Tools face brass, copper, steel, stainless steel, copper nickel, and titanium tubes. Cutter on fixed-type tool can be sharpened, ...
Laser Cutting System cuts tubes without deforming.
TRUMPF Inc. -- February 11, 2003
TUBEMATIC RC automatically processes thin-walled tubes, delivered from bundle magazine, measuring up to 21 ft (standard) or 31 - during cutting process. System is suitable for production of stainless steel tubes, end tube preparation for tube-to-tube multi-angled joining, as well as - TUBEMATIC RC laser cutting system from TRUMPF cuts thin-walled tubes that require a clean cut without deformation. ...
Compression Tube Fittings are rated at 15,000 psi.
Parker Hannifin Corp., Instrumentation Connectors Div. -- July 26, 2004
... provide single-piece, vibration-resistant solution for common connection requirements. MPI tube fittings are available in sizes to suit tubing with ODs from ¼–¾ in. and include straight, 45°, and 90° shapes that combine MPI tube stub end with connector for existing instrumentation. • 15 - completed its breakthrough family of rapid-assembly 15,000PSI compression tube fittings. With the release of 15 new component - savings total would more than double. Parker's MPI tube fitting range is available in a range of instrumentation sizes to suit tubing with outside diameters from 1/4 to ...
Instrumentation Fittings handle high pressures.
Parker Hannifin Corp., Instrumentation Connectors Div. -- June 01, 2002
... used on 316 stainless-steel, cold-drawn, 1/8 hard, unannealed tubing or thick-walled, annealed, instrumentation-grade 316 tubing, and are available for tubing ranging from 1/4 to 1 in. OD - fitting consists of four precision-engineered parts, including a longer tube support section, compared to traditional compression fittings. The - assembly.' 'The front SUPARCASE(R) ferrule grips onto the tube as it moves down the body seat, creating a pressure-tight seal on both the tube and body. The rear SUPARCASE(R) ferrule ...
Cold Plates fit in small spaces.
Lytron, Inc. -- June 07, 2002
Press-Lock II™ series uses smaller, tightly packed tubes to improve thermal performance by 40 to 50% over company ... previous models. Plates are 0.3 in. thick and tubes are 0.25 in. dia, allowing for tight packaging and stack construction. Tubes are coplanar with plate, allowing parts to be - ultra-thin Press-Lock II™ series uses smaller, more tightly packed tubes to improve thermal performance by 40 to 50% over other tubed cold plates. Furthermore the new product line provides - thick, a 40% reduction over cold plates using thicker tubing constructions. This design allows for tighter packaging ...
Composite Cylinder Tubing offers low coefficient of friction.
Polygon -- May 16, 2002
... where piston remains static for extended periods of time. Tubing will not corrode, is thermally stable, and can be used as replacement for honed stainless steel tubing. It resists corrosive liquids, works in temperatures from - a development program to redesign the existing composite cylinder tubing material being supplied to the fluid power industry - and in an effort to target the metallic cylinder tubing conventionally used in the industrial equipment marketplace. ...
Conveyor Rollers suit food processing industry.
Interroll Corp. -- February 26, 2003
... 1100 Series offers free-rolling rollers and plastic bearings with stainless steel balls in double labyrinth seal. Sanitary 1500 Series - and journal bearings. Universal 1700 Series, for use with stainless steel tube, includes commercial, precision, or stainless steel bearings protected by double labyrinth design. ...
Piping System joins copper tubing for gas applications.
Ridge Tool Co. -- August 27, 2004
... gas, LP gas and fuel oil installations using copper tubing. The ProPress G™ system is an extension of - the partners’ popular ProPress® line used to join copper tubing for water applications. Like the ProPress system, ProPress - been widely reported in the trade press that copper tubing has been tested and approved for natural gas - key benefits. Copper is less expensive than flexible, corrugated, stainless steel tubing. It is also widely available and has ...
Level Indicators measure liquid levels inside tanks.
Dwyer Instruments, Inc. -- June 12, 2003
... 96 in. Series VR is composed of 316 L stainless steel and has tube diameter of 2 ½ in., while Series MVR has 1 ¼ in. tube diameter and is constructed with 304 stainless steel housing and 316 stainless steel float. Dwyer ...
Compression Fitting Nuts minimize galling.
Parker Hannifin Corp., Instrumentation Connectors Div. -- November 06, 2002
Moly Inside!™ Nuts are made of stainless steel and help eliminate problems of inconsistent remakes during assembly of stainless steel tubing systems. Inside of each nut features bonded coating - HUNTSVILLE, Alabama–October 1, 2002–A new line of stainless steel compression fitting nuts from the Instrumentation ...
Humidity Regulator controls surface oxides.
Drever Co. -- October 25, 2002
... furnace belt life by 33% and prevents adherence of stainless steel tubes to each other in heat processing operations where - extends furnace belt life and prevents the adherence of stainless steel tubes to each other in heat processing operations ...
OPGW Cable enables optical communications.
Alcatel USA, Inc. -- May 18, 2004
... replacement for overhead ground or static wire. Designs use stainless steel or aluminum tubes along with aluminum-clad steel and aluminum-alloy wires to provide electrical grounding protection - the existing ground wire. The Alcatel OPGW designs use stainless steel or aluminum tubes along with aluminum-clad steel ...
Flexible Screw Conveyors offer clean, versatile operation.
Cyclonaire Corp. -- March 07, 2003
FlexFlite™ Conveyors use steel augers and flexible tubes up to 150 ft in length to move materials at - to the material-handling marketplace. FlexFlite Flexible Screw Conveyors use steel augers and flexible tubes up to 150 feet long to move materials - to ensure positive movement of material through the delivery tube and metering accuracy. Close pitching of the spiral - have spirals, head housings, and in-feed adapters made from stainless steel and tubing made from UHMW polypropylene. ...
Enclosures meet requirements of IP69K rating.
Rittal Corporation -- September 14, 2004
... keyboard housing, Premium Panel units are Type 304 brushed stainless steel with depths of 4.72 or 8.66 ... Offering junction box solution, KL Premium Line is 304 stainless steel and available in sizes from 6 x 6 - 10 to 12 ft. Constructed of Type 304 brushed stainless steel, Rittal’s new Premium Panel offers an ...
Modular Gas Panel controls specialty gases at point-of-use.
Scott Specialty Gases -- September 03, 2003
... frame and are connected to primary gas supply with stainless steel tubing. Any combination of pressure regulators, purifiers, moisture traps - easily connected to the primary gas supply with flexible, stainless steel tubing. Pressure control panels feature a high-purity regulator ...
Flow Control Regulators measure under 1 in. in height.
Parker Hannifin Corp., Pneumatic Div. -- December 02, 2003
... nut ensures that settings are maintained. Units have push-to-connect tube ends with NPT threads. All feature glass-reinforced nylon composite body, SS tube gripping ring, and nickel-plated brass adjustment screw. Working ... available in meter out versions. The regulators have push-to-connect tube ends with NPT threads. All regulators feature glass reinforced nylon composite body, stainless steel tube gripping ring and adjustment screw components of ...
Aero-Mechanical Conveyor handles cohesive materials.
Spiroflow Systems, Inc. -- March 11, 2004
... of rope and disk assembly enclosed in carbon or stainless steel tubes, works with inherently sticky, cohesive materials by fluidizing - a rope and disk assembly enclosed in carbon or stainless steel tubes. By maintaining the rope/disk assembly at ...
Weld Heads suit limited access applications.
Orbimatic GmbH -- August 17, 2004
Designed for welding closely packed stainless steel tubes and fittings in pipeline systems, Orbiweld S series slim line - offshore, pharmaceutical, and aerospace industries. For welding closely packed stainless steel tubes and fittings in high quality pipeline systems ...
Injection Systems suit oil and gas industries.
YZ Systems -- March 13, 2003
... for remote flow/no flow indication and ½ in. SS tubing. Conroe, Texas (February 12, 2003): Crafted from 54 ... Both Milton Roy diaphragm metering pumps feature: - 316 Stainless Steel Construction - Hydraulically actuated diaphragms for enhanced chemical - mounted flow switch for remote flow/no flow indication • ½” Stainless Steel tubing throughout • Corrosion Resistant 3-coat Ameron paint system ...
|
|
|
|
» Related categories
» Information Sources
» User comments * BETA *
Great work on your site!! It keeps getting better
What a great, simple article saying so much with so few words. Good writing
the double spacing worked against you. With your phrasing this would be better suited with the lines not meandering across the page. otherwise, pretty good
|
|
