|
» Generated Results for aluminum tubing
Trim Saw cuts copper and aluminum tubes.
JMD Mfg., Inc. -- April 21, 2004
... table and sub-assembly provide structural support, while hydraulically actuated tube clamp anchors various sized tubes that can be cut simultaneously. Hydraulic motor drives - and hydraulic cylinder with feed valve feeds blade through tubes. Lubrication and cooling are provided via automatic spray - introduces the Model 315 Trim Saw for copper and aluminum tubular product. The 315 produces accurate, repeatable, smooth - and superior durability. The table incorporates a hydraulically actuated tube clamp to anchor a number of tubes and of various sizes which can be ...
Tube Benders bend up to 1/2 in. tubing.
Stride Tool Inc. -- August 12, 2003
Models 370-FH and 371-FH Triple-Head Tube Benders feature offset handles that enable smooth, tight-radius 180° bends in one - hook that can be repositioned depending on size of tubing. Die-cast aluminum tools feature calibrated markings for accurate left-hand, right-hand - 8, and 1/2 in. OD soft copper and aluminum. Metric Model 371-FH bends 8, 10, and 12 mm OD tubes. NILES, IL (August 6, 2003) - A new patented tube bender designed and produced by Imperial, a ...
Laser Cutting System permits use of random tube lengths.
AltaMAR Laser & Control Inc. -- July 17, 2002
... System is capable of cutting mild steel, stainless, or aluminum of various sizes and wall thicknesses. Round, rectangular, or ob-round tubes can be processed. LT1200 unit accommodates raw tubes to 12 ft, and LT2400 accepts tubes to 24 ft. Each system offers PC-based controller - Laser and Control introduces its LT1200 and LT2400 Laser Tube Cutting Systems. AltaMAR Laser and Control developed an expertise in laser tube cutting in their job shop and have ...
Cold Water Pressure Washers feature aluminum frame.
Mi-T-M Corp. -- August 18, 2004
... brass unloader. Units are also equipped with 1 in. aluminum tube handles, 3/16 in. aluminum base plates, pneumatic tires, plus 50 ft non-marking - nozzles. Mi-T-M® Corporation introduces a cold water series of aluminum pressure washers called the CA Series. The CA Series cold water aluminum pressure washers have been designed for the commercial - have come to expect from a Mi-T-M product. The aluminum frame is lightweight and is popular in ...
Aluminum Saddle mounts cold plates to electronic boards.
Lytron, Inc. -- April 08, 2002
Aluminum Saddle has through or tapped holes for securing company's CP-20 Extended Surface cold plates to electronic - good thermal connection. All-aluminum cold plates consist of connector tubes welded to micro-channel aluminum extrusion. They can be used with EGW, refrigerant - Lytron, the Total Thermal Solutions(TM) company, introduces an aluminum saddle for mounting CP-20 Extended Surface cold plates - and cost-effective. The new mounting system consists of an aluminum saddle with through or tapped holes for securing ... Power Supplies. These all-aluminum cold plates consist of connector tubes welded to a unique micro-channel aluminum extrusion. ...
Heat Exchangers are pressure tested to 150 psi.
Lytron, Inc. -- February 04, 2003
... gpm to 250W/°C at 4 gpm. Seamless copper tubing is expanded into aluminum fins for thermal connection. Liquid circuit is silver brazed and finned tubes are assembled into galvanized steel frame. Six configurations are available with beaded, straight tube, or 37° flare nut fluid connections. Air side - while ensuring excellent performance, Lytron's OEM Coils use aluminum fin, and galvanized steel side rails and tube sheets. Tube spacing was increased (as compared ...
Flowmeter Kit offers interchangeable flow tubes and floats.
Dwyer Instruments, Inc. -- February 21, 2003
... Variable Area Flowmeter Kit includes completely assembled flowmeter with aluminum or 316SS end fittings and 3 interchangeable, 150 mm flow tubes. All flow tubes are supplied with glass float and spare 316SS - kit includes a completely assembled flowmeter available with either aluminum or 316SS end fittings and three interchangeable 150mm flow tubes. All flow tubes are supplied with a glass float installed ...
Aluminum Connectors suit freestanding wall applications.
Walls & Forms, Inc. -- June 05, 2002
Aluminum Connectors, used on CornerForms™ panel connector system, feature formed channels that nest metal standards. They include Corner - countersunk holes. Connectors come in 96 in. lengths. Additional aluminum profiles include tubes, bullnose profiles, channel moldings, poster frame and display - show, and a variety of additional industries, now offers aluminum panel connectors that are a new twist on - designed to accept 3/4' + predrilled countersunk holes. These aluminum panel connectors are available in 96' lengths. They - Forms can even produce custom systems that utilize these aluminum panel connectors. Walls + Forms offers additional aluminum ...
Pinch Valve handles 3/8 in. tubing without mess.
Dispensing Technologies International Corp. -- April 03, 2003
... has removable cover plate, which eliminates need to pull tubes through hole for insertion or removal. Flat bearing - and fully adjustable pinch blade spreads closing force on tubing for precise shots without excessive wear. Anodized aluminum, normally open valve measures 1¾ in. dia x - closes in milliseconds. A new pneumatic pinch valve for tubing up to 3/8' O.D. which features - a removable cover plate that eliminates the need for tube pull-thru is being introduced by DTIC Dispensing Technologies - Lancaster, Massachusetts. The EZ-pinch™ Pneumatic Pinch Valve operates with tubing up to 3/8' O.D. and ...
Tubing Cutter has spring-loaded cutter wheel.
Ridge Tool Co. -- February 03, 2003
... action for automatic cutting. By tightening knob, user cuts tubing cleanly and precisely. Device cuts small diameter copper, aluminum, and brass pipe and tubing. Cutter weighs 4 oz., is adjustable from 3 - the RIDGID® Model 117 self-acting midget cutter, a new tubing cutter featuring a spring-loaded cutter wheel with self-feeding ... tightening the knob once, the user can cut the tubing cleanly and precisely. The cutter wheel cuts small-diameter pipe and tubing made of hard and soft copper, aluminum ...
Tube Fittings are available in many materials.
Parker Hannifin Corp., Instrumentation Connectors Div. -- December 19, 2002
A-LOK instrumentation tube fittings are available in heat code traceable 316 stainless steel, brass, steel, aluminum, nickel-copper, Hastelloy C, Alloy 600, titanium, 6Mo, Incoloy - developed a complete line of A-LOK® brand four-piece Instrumentation Tube fittings. 'A-LOK fittings are available in a variety - and material to meet all applications where a high-quality tube fitting is required,' said D.F. Bush, Marketing - be used to connect a wide variety of industrial tubing installations. The fittings are available in Heat Code Traceable 316 stainless steel, brass, steel, aluminum, nickel-copper, Hastelloy C®, Alloy 600, titanium, 6Mo, ...
Solar Tubing uses Specular+® reflective material.
MSC Pre Finish Metals, Inc. -- June 24, 2002
... generates 3750, 6500, and 8200 lumens respectively. Maximum recommended tube lengths are available to 15 ft. One innovative - room space relies on the reflectance of its interior tube material. Recently, various manufacturers began incorporating high reflectance - the appearance of a standard light fixture. The cylinder tubing can be angled around attic or other obstructions - installation. The highly reflective interior material lining of the tubing reflects light all the way down the tube to the diffuser. Owing to the total reflectance ... a careful examination of the available vendors, several solar tube manufacturers chose to partner with MSC, Material ...
Heat Shrink Tubing is offered in four styles.
Penn-Union Corp. -- June 20, 2002
... conform to irregular shapes, Penn-Shrink Clear thin-wall, flexible polyolefin tubing provides mechanical, thermal, solvent, and fluid resistance. Penn-Shrink Black Thin-Wall flame retardant, flexible, low shrink-temperature polyolefin tubing meets UL 224 VW-1 and CSA VW-1 (OFT - requirements. Penn-Shrink Heavy-Wall with Adhesive polyolefin heavy-wall heat shrinkable tubing is chemical, corrosion, impact, and abrasion resistant. Made - industrial, utility and OEM markets, introduces new PENN-SHRINK HEAT-SHRINK TUBING. PENN-SHRINK products are available in four styles: Penn-Shrink - Clear (Type PSC) is a thin-wall, flexible, general-purpose polyolefin tubing. It is designed to provide superior mechanical, thermal - a highly flame retardant, very flexible, low shrink-temperature polyolefin tubing designed to meet the stringent requirements of ...
Mining Couplers offer flesh tone insulator tubes.
Adalet -- February 11, 2003
PLM mining couplers employ Kerite® EP, flesh tone insulator tubes that make dirt, contamination, and tracking more identifiable - to 15,000 V in 3 coupling designs: standard, aluminum threaded body; green Quick-Thread 2 ½ turn joining collar - easier to maintain due to a change in insulator tube color from light gray to flesh tone. This - coupler recognition in the field. The standard threaded body Aluminum), the Quick-Thread 2-1/2 turn joining collar (green ...
Mounting Components fit EOAT aluminum extrusions.
Anver Corp. - Anver.Com -- January 06, 2004
... service custom EOAT (end of arm tool) assemblies using aluminum extrusions in inch or metric sizes from 25 ... compensator mounting brackets and suspensions, adapters, fittings, hose barbs, tubing, bolts, and vacuum and suction cups. A full - service custom EOAT assemblies using any type of popular aluminum extrusion including inch or metric sizes from 25mm - compensator mounting brackets and suspensions, adapters, fittings, hose barbs, tubing, bolts, and vacuum- and suction cups in a ...
Cold Plates fit in small spaces.
Lytron, Inc. -- June 07, 2002
Press-Lock II™ series uses smaller, tightly packed tubes to improve thermal performance by 40 to 50% over company ... previous models. Plates are 0.3 in. thick and tubes are 0.25 in. dia, allowing for tight packaging and stack construction. Tubes are coplanar with plate, allowing parts to be - ultra-thin Press-Lock II™ series uses smaller, more tightly packed tubes to improve thermal performance by 40 to 50% over other tubed cold plates. Furthermore the new product line provides - thick, a 40% reduction over cold plates using thicker tubing constructions. This design allows for tighter packaging ...
Flexible Sleeves provide protection from radiated heat.
Clevaflex, Ltd. -- February 20, 2003
Clevaflex® Sewn Sleeves, made from woven fiberglass laminated to aluminum foil, provide protection of components from heat sources - power steering hoses, air conditioning hoses, wire harnesses, brake tubes, and spark plug wires. Clevaflex® Sewn Sleeves are - from a woven fiberglass that is laminated to an aluminum foil. The laminate is then folded in half - edge, creating a strong, yet flexible sleeve. The highly-reflective aluminum, combined with the woven fiberglass, provides protection of - hoses, air conditioning hoses, water hoses, wire harnesses, brake tube and hose, spark plug wires, and other critical - facility of its kind in North America for wound tubing, including both thermally-bonded tubing and mechanically-interlocked tubing. ...
Notcher Grinder notches pipe or tube in seconds.
CML USA-Ercolina -- February 25, 2003
... any angle between 0–60° degrees in pipe or tube with 1–4½ in. dia. Product produces notches in heavy or thin wall pipe or tube. Single slide handle movement allows operator to control - CML USA Inc Ercolina® introduces the EN180 pipe and tube notcher grinder by Era Tools. The EN180 adjusts - any angle 0 to 60 degrees in pipe or tube 1' to 4-1/2' diameter in seconds. Precise - easily produced in heavy or thin wall pipe or tube, dramatically improving notching productivity and work piece quality - materials including: Carbon steel, Stainless steel, Inconnel, Chrome Molley, Aluminum and Titanium. Standard vacuum system built into ...
Photoelectric Frame Sensors come in aluminum housing.
EMX Inc. -- March 04, 2003
... FRS Series incorporates microprocessor to allow insertion of transparent tube through sensing area to guide difficult to handle - incorporates a microprocessor to allow insertion of a transparent tube through the sensing area to guide difficult to ...
Pulsation Dampener suits aluminum air diaphragm pumps.
Blacoh Fluid Control, Inc. -- June 16, 2004
SENTRY 2.5 gallon aluminum pulsation dampener is designed for 2 in. aluminum air diaphragm pumps. Capacity of stroke volume offers - metering applications. Riverside, CA –The SENTRY 2.5 gallon aluminum pulsation dampener from Blacoh is a low-cost, high-quality Pulsation Dampener for 2" aluminum air diaphragm (AODD) pumps. With a capacity over - vibration, and shaking up to 99%, protect expensive high-pressure tube & pipe, and extend pump component life while improving ...
|
|
|
|
» Related categories
» Information Sources
» User comments * BETA *
There are few nudities so objectionable as the naked truth.
lots of depth and there are a few spots that really make this stand out.
you really said a lot with just a few words
|
|
